Reduce Inspection Costs with Sequential Sampling

Speaker

Instructor: William Levinson
Product ID: 705336

Location
  • Duration: 60 Min
This webinar will explain how to use ANSI/ASQ Z1.4 to define sampling plans including its switching rules. It will also offer an inspection plan format that reduces the sequential sampling plan to ten or fewer rows in most cases.
Purchase option for this webinar is currently unavailable. Please contact our Customer Care for more info. Webinar All Access Pass Subscription

 

Customer Care

Fax: +1-650-362-2367

Email: [email protected]

Read Frequently Asked Questions

 

Why Should You Attend:

ANSI/ASQ Z1.4 is a basic and widely used sampling plan in many industries. It is therefore important to understand not only its mechanics but also switching rules that depend on process performance. The switching rules allow reduced inspection when quality is very good, but require tightened inspection when there is evidence that process performance has deteriorated.

Inspection does not, however, add actual value to the product. It is therefore desirable to minimize it as long as the inspection plan still meets quality requirements. This is where double, multiple, and sequential sampling plans come into play, and this webinar will show how to define a sequential sampling plan in a simple and inspector-friendly format.

Areas Covered in the Webinar:

  • How to use ANSI/ASQ Z1.4 to define sampling plans based on (1) lot size N, (2) the acceptable quality level (AQL), and (3) the specified inspection level.
  • ANSI/ASQ Z1.4's switching rules that allow transition to reduced inspection when quality is good, and require tightened inspection when quality problems occur.
  • An inspection plan format that reduces the plan to ten or fewer rows in most cases.
  • How to calculate the ASN as well as the probability of acceptance at any given quality level (nonconforming fraction); the latter defines the operating characteristic (OC) curve.

Who Will Benefit:

  • Quality Managers
  • Manufacturing Professionals
  • Audit Managers
  • Quality Auditors
  • Regulatory Affairs Managers
Instructor Profile:
William Levinson

William Levinson
Principal Consultant, Levinson Productivity Systems

William A. Levinson, P.E., is the principal of Levinson Productivity Systems, P.C. He is an ASQ Fellow, Certified Quality Engineer, Quality Auditor, Quality Manager, Reliability Engineer, and Six Sigma Black Belt. He is also the author of several books on quality, productivity, and management.

Topic Background:

ANSI/ASQ Z1.4 (formerly Mil-STD 105) is a standard for quality sampling by attributes, and it is frequently used for acceptance sampling in incoming, in-process, and outgoing inspections. It defines a sample plan in terms of sample size n and acceptance number c based on the sampling level, acceptable quality level (AQL) and lot size. It is however possible to reduce the sample size, and inspection costs, with sequential sampling plans.

Sampling by attributes, in which a sample is inspected to determine whether a production lot should be accepted or rejected, is a basic quality assurance technique. The simplest plan involves inspection of n pieces and, if more than the acceptance number (c) are nonconforming, then the lot is rejected. This does not usually mean the lot is thrown away; it is subjected to 100 percent inspection to sort out all the nonconforming units. Rejection may also invoke switching rules that require more stringent inspection of subsequent lots.

Inspection is however a mandatory but non-value-adding activity, which means we should do as little as possible consistent with quality requirements as expressed in terms of acceptable quality level (AQL) and specified inspection level. ANSI/ASQ Z1.4 includes double and multiple sampling plans whose purpose is to reject very bad lots quickly, and accept very good ones quickly. This usually results in less inspection.

The ultimate extension of the multiple sampling plan is the sequential sampling plan, in which units are inspected one at a time until a decision point is reached. This minimizes the average sample number, and therefore the inspection cost.

Follow us :

 

 

Refund Policy

Our refund policy is governed by individual products and services refund policy mentioned against each of offerings. However in absence of specific refund policy of an offering below refund policy will be effective.
Registrants may cancel up to two working days prior to the course start date and will receive a letter of credit to be used towards a future course up to one year from date of issuance. ComplianceOnline would process/provide refund if the Live Webinar has been cancelled. The attendee could choose between the recorded version of the webinar or refund for any cancelled webinar. Refunds will not be given to participants who do not show up for the webinar. On-Demand Recordings can be requested in exchange. Webinar may be cancelled due to lack of enrolment or unavoidable factors. Registrants will be notified 24hours in advance if a cancellation occurs. Substitutions can happen any time. On-Demand Recording purchases will not be refunded as it is available for immediate streaming. However if you are not able to view the webinar or you have any concern about the content of the webinar please contact us at below email or by call mentioning your feedback for resolution of the matter. We respect feedback/opinions of our customers which enables us to improve our products and services. To contact us please email [email protected] call +1-888-717-2436 (Toll Free).

 

 

+1-888-717-2436

6201 America Center Drive Suite 240, San Jose, CA 95002, USA

Follow Us

facebook twitter linkedin youtube

 

Copyright © 2023 ComplianceOnline.com MetricStream
Our Policies: Terms of use | Privacy

PAYMENT METHOD: 100% Secure Transaction

payment method